STRIDER M72 Power Meter
STRIDER M72 Power Meter
$520.30
*Excluding GST
SKU ME-PM-M72 Category Panel Mount Multifunction Energy Meters
The Mercs STRIDER M72 (ME-PM-M72) measures and displays the characteristics of single phase two wires (1p2w), three phase three wires (3p3w,) and three phase four wires(3p4w) supplies, including voltage, frequency, current, power ,active and reactive energy, imported or exported. Energy is measured in terms of kWh, kVArh. Maximum demand current can be measured over pre-set periods of up to 60 minutes. In order to measure energy, the unit requires voltage and current inputs in addition to the supply required to power the product.
STRIDER M72 supports the safe and easy to use 333mV RJ12 CT connection and can be used with a wide range of Current inputs, giving the unit a cost-effective operation. Built-in interfaces provides for RS485 Modbus RTU outputs. Configuration is password protected.
More Details
Introducing MerCs range of Panel Mount multifunction energy analysers. The Strider M72, is a top quality new-generation intelligent energy meter. They are used not only used in the electricity transmission and power distribution system, but also in the power consumption, measurement and analysis in high voltage intelligent power grids. The Strider M72 measures and displays the characteristics of 1p2w, 3p4w and 3p3w supplies, including voltage, frequency, current, power and active and reactive energy, imported or exported, Harmonics, Power factor, Max. Demand etc. Energy is measured in terms of kWh, kVArh and kVAh.
Maximum demand current can be measured over pre-set periods of up to 60minutes.
In order to measure energy, the unit require voltage and current inputs in addition to the supply input required to power the product. The requisite current input(s) are obtained via current transformers that use the safe and easy to use 333mV RJ12 connection. The RJ12 connections are fast to connect and helps to avoid human error when wiring up.
Features
- High Quality easy to use and read Panel Mount Multifunction energy Meter
- Measures kWh Kvarh, KW, Kvar, KVA, P, F, PF, Hz, dmd, V, A, etc.
- CT Connection for current input via quick and safe RJ12 socket connections 333mV
- Measures 240VAC (A-N) Single phase and 3Phase 415VAC ( A-A) circuits
- Wide range of currents can be monitors via Current Transformer(s)
- RS485 Modbus RTU communications
- Accuracy Class 0.5s
- Bi-directional measurement IMP & EXP
- Voltage reference and RS485 connections use a Plug in terminal
- IEC62053-22 Class 0.5s accuracy
- High Quality easy to use and read Panel Mount energy Meter
- Voltage reference and RS485 connections can be daisy chained to similar meters
- Can be connected to the internet through the Strider M71 or through an RS485 to Ethernet converter.
- IEC62053-22 Class 0.5s accuracy